Refine
Document Type
- Doctoral Thesis (3)
Language
- English (3)
Has Fulltext
- yes (3)
Is part of the Bibliography
- no (3)
Keywords
- Virtualisierung (3) (remove)
The current movement towards a smart grid serves as a solution to present power grid challenges by introducing numerous monitoring and communication technologies. A dependable, yet timely exchange of data is on the one hand an existential prerequisite to enable Advanced Metering Infrastructure (AMI) services, yet on the other a challenging endeavor, because the increasing complexity of the grid fostered by the combination of Information and Communications Technology (ICT) and utility networks inherently leads to dependability challenges.
To be able to counter this dependability degradation, current approaches based on high-reliability hardware or physical redundancy are no longer feasible, as they lead to increased hardware costs or maintenance, if not both. The flexibility of these approaches regarding vendor and regulatory interoperability is also limited. However, a suitable solution to the AMI dependability challenges is also required to maintain certain regulatory-set performance and Quality of Service (QoS) levels.
While a part of the challenge is the introduction of ICT into the power grid, it also serves as part of the solution. In this thesis a Network Functions Virtualization (NFV) based approach is proposed, which employs virtualized ICT components serving as a replacement for physical devices. By using virtualization techniques, it is possible to enhance the performability in contrast to hardware based solutions through the usage of virtual replacements of processes that would otherwise require dedicated hardware. This approach offers higher flexibility compared to hardware redundancy, as a broad variety of virtual components can be spawned, adapted and replaced in a short time. Also, as no additional hardware is necessary, the incurred costs decrease significantly. In addition to that, most of the virtualized components are deployed on Commercial-Off-The-Shelf (COTS) hardware solutions, further increasing the monetary benefit.
The approach is developed by first reviewing currently suggested solutions for AMIs and related services. Using this information, virtualization technologies are investigated for their performance influences, before a virtualized service infrastructure is devised, which replaces selected components by virtualized counterparts. Next, a novel model, which allows the separation of services and hosting substrates is developed, allowing the introduction of virtualization technologies to abstract from the underlying architecture. Third, the performability as well as monetary savings are investigated by evaluating the developed approach in several scenarios using analytical and simulative model analysis as well as proof-of-concept approaches. Last, the practical applicability and possible regulatory challenges of the approach are identified and discussed.
Results confirm that—under certain assumptions—the developed virtualized AMI is superior to the currently suggested architecture. The availability of services can be severely increased and network delays can be minimized through centralized hosting. The availability can be increased from 96.82% to 98.66% in the given scenarios, while decreasing the costs by over 60% in comparison to the currently suggested AMI architecture. Lastly, the performability analysis of a virtualized service prototype employing performance analysis and a Musa-Okumoto approach reveals that the AMI requirements are fulfilled.
The increasing scale and complexity of computer networks imposes a need for highly flexible management mechanisms. The concept of network virtualization promises to provide this flexibility. Multiple arbitrary virtual networks can be constructed on top of a single substrate network. This allows network operators and service providers to tailor their network topologies to the specific needs of any offered service.
However, the assignment of resources proves to be a problem. Each newly defined virtual network must be realized by assigning appropriate physical resources. For a given set of virtual networks, two questions arise: Can all virtual networks be accommodated in the given substrate network? And how should the respective resources be assigned? The underlying problem is commonly known as the Virtual Network Embedding problem. A multitude of algorithms has already been proposed, aiming to provide solutions to that problem under various constraints. For the evaluation of these algorithms typically an empirical approach is adopted, using artificially created random problem instances. However, due to complex effects of random problem generation the obtained results can be hard to interpret correctly. A structured evaluation methodology that can avoid these effects is currently missing.
This thesis aims to fill that gap. Based on a thorough understanding of the problem itself, the effects of random problem generation are highlighted. A new simulation architecture is defined, increasing the flexibility for experimentation with embedding algorithms. A novel way of generating embedding problems is presented which migitates the effects of conventional problem generation approaches. An evaluation using these newly defined concepts demonstrates how new insights on algorithm behavior can be gained. The proposed concepts support experimenters in obtaining more precise and tangible evaluation data for embedding algorithms.
The increasing cost of energy and the worldwide desire to reduce CO2 emissions has raised concern about the energy efficiency of information and communication technology. Whilst research has focused on data centres recently, this thesis identifies office computing environments as significant consumers of energy. Office computing environments offer great potential for energy savings: On one hand, such environments consist of a large number of hosts. On the other hand, these hosts often remain turned on 24~hours per day while being underutilised or even idle. This thesis analyzes the energy consumption within office computing environments and suggests an energy-efficient virtualized office environment. The office environment is virtualized to achieve flexible virtualized office resources that enable an energy-based resource management. This resource management stops idle services and idle hosts from consuming resources within the office and consolidates utilised office services on office hosts. This increases the utilisation of some hosts while other hosts are turned off to save energy. The suggested architecture is based on a decentralized approach that can be applied to all kinds of office computing environments, even if no centralized data centre infrastructure is available. The thesis develops the architecture of the virtualized office environment together with an energy consumption model that is able to estimate the energy consumption of hosts and network within office environments. The model enables the energy-related comparison of ordinary and virtualized office environments, considering the energy-efficient management of services. Furthermore, this thesis evaluates energy efficiency and overhead of the suggested approach. First, it theoretically proves the energy efficiency of the virtualized office environment with respect to the energy consumption model. Second, it uses Markov processes to evaluate the impact of user behaviour on the suggested architecture. Finally, the thesis develops a discrete-event simulation that enables the simulation and evaluation of office computing environments with respect to varying virtualization approaches, resource management parameters, user behaviour, and office equipment. The evaluation shows that the virtualized office environment saves more than half of the energy consumption within office computing environments, depending on user behaviour and office equipment.