FG Bodenschutz und Rekultivierung
Refine
Year of publication
Document Type
Keywords
Institute
- FG Geopedologie und Landschaftsentwicklung (31) (remove)
BTU
Die zurückliegenden trocken-heißen Sommer haben im Süden Brandenburgs zu zahlreichen Bränden in den dominierenden Kiefernwäldern geführt, einige davon mit katastrophalen Ausmaßen. Dazu gehören die extremen Brandereignisse 2018 bei Treuenbrietzen sowie 2019 bei Jüterbog und Lieberose, die zusammen weit über 1000 ha Waldfläche zerstört und dabei auch Veränderungen der betroffenen Waldböden verursacht haben.
Das seit Mai 2020 von der FNR geförderte Verbundvorhaben Pyrophob befasst sich mit den Auswirkungen von Waldbränden im Süden Brandenburgs auf die Waldökosysteme und mit waldbaulichen Maßnahmen, die mittelfristig zu einer Verringerung der Brandanfälligkeit der Wälder beitragen sollen. Im Rahmen des auf eine fünfjährige Laufzeit ausgelegten Verbundvorhabens finden bodenkundliche Untersuchungen auf zwölf Versuchsflächen bei Treuenbrietzen und Jüterbog statt. An beiden Standorten werden unverbrannte Referenzflächen mit einbezogen. Ergänzend konnten bei Lieberose bereits 2019 nur kurz nach dem Brandgeschehen erste Bodenuntersuchungen durchgeführt werden. Die untersuchten Brandflächen bei Jüterbog und Lieberose sind als Totalreservate ausgewiesen, auf denen auch nach dem Brand waldbauliche Maßnahmen vollständig unterbleiben. Auf den Flächen bei Treuenbrietzen wurden verschiedene Behandlungsvarianten durchgeführt, zu denen auf einem Teil der Flächen die vollständige Entfernung der abgestorbenen Bäume gehörte, während auf anderen Teilflächen Totholz auf der Fläche verblieb.
Ziel der bodenkundlichen Arbeiten in Pyrophob ist zum einen eine Charakterisierung der direkten Auswirkungen des Brandes auf Humus und Mineralboden hinsichtlich des Stoffbestandes und bodenbiologischer Prozesse. Zum anderen wird der Stoffaustrag aus dem Oberboden erfasst. Der etwaige Einfluss der unterschiedlichen waldbaulichen Vorgehensweise auf die Bodenverhältnisse wird dabei als ein Indikator für die Auswahl geeigneter Maßnahmen berücksichtigt.
In den verschiedenen Untersuchungsvarianten des Vorhabens wurden zu diesem Zweck Humus- und Mineralbodenprofile untersucht. Zudem wurden Mischproben aus dem Ober- und Unterboden entnommen und auf ihren Stoffhaushalt hin analysiert. Auf jeder Untersuchungsfläche wurden je drei frei dränende Kleinlysimeter in 10 cm Bodentiefe installiert, um die zeitlichen Veränderungen der Sickerwasserzusammensetzung und die durch den Brand initiierten Stoffausträge aus dem Oberboden zu quantifizieren. Ergänzend finden Untersuchungen zu möglichen Auswirkungen der Brände auf bodenbiologische Prozesse wie Streuabbau und Stickstoffmineralisation statt.
This study aims at investigating the iron cyanide (CN) degradation potential of two natural bacterial isolates with the purpose of their application in iron CN phytoremediation. The strains were isolated from contaminated soil and incubated over 4 months with 50mg L⁻¹CN (as ferrocyanide) as the sole iron and nitrogen source. Unlike previous reports, the study provides control for bacterial growth, biotic and abiotic CN losses. Bacterial growth, CN, ammonium, and nitrate concentrations were monitored regularly. Both strains grew less rapid with iron CN compared with the positive control. However, the growth was diauxic. The CN concentration in the media decreased with 20% and 25% respectively, while that in the sterile controls remained stable. Ammonium was detected in the media of both strains implying that a fraction of the initially applied ferrocyanide has been converted. The nitrogen lost from the system evened out with that in the cells at the end of the experiments. These results showed that the investigated strains were undoubtedly able to grow on iron CN as an alternative nitrogen source, but contrary to some previous findings, the iron CN utilization is much slower and takes place only after complete exhaustion of the cellular nitrogen reserves.
The occurrence, soil parameters and genesis of rubified soils (‘Fuchserden’) of northeastern Germany
(2019)
The formation of dunes in central Europe reflects ample sediment supply during the last deglacial hemicycle. A Quaternary inland dune complex in southern Brandenburg, Germany, was studied to frame the duration of pedogenesis in two outcrops containing buried paleosols. An integrative approach, which combined geomorphological, sedimentological, pedological and chronological methods was used to identify aeolian deposition events, ensuing pedogenesis and anthropogenic remobilization. At the outcrops, which were situated approximately 2 km apart from each other, a total of twelve samples of the aeolian sands were dated using optically stimulated luminescence (OSL) and a further six samples using 14C dating. Although the dunes have similar morphological features, these forms have a different history of aeolian sand deposition and pedogenesis. At the older dune (Gl 1) the surface soil is a well developed Podzol, whereas soil development of the younger dune (Gl 2) is clearly in an initial state. The studied sites of the dune complex also differ in grain size distribution and in the presence of buried soils, thereby indicating a climatic impact on aeolian remobilization.
Soils and groundwater on sites of the former Manufactured Gas Plants (MGPs) are contaminated with various complex iron-cyanides (Fe-CN). Phytoremediation is a promising tool in stabilization and remediation of Fe-CN affected soils, however, it can be a challenging task due to extreme adverse and toxic conditions. Phytoremediation may be enhanced via rhizosphere microbial activity, which can cooperate on the degradation, transformation and uptake of the contaminants. Recently, increasing number of scientist reports improved plants performance in the removal of toxic compounds with the support of arbuscular mycorrhizae fungi (AMF). Series of batch experiments using potassium hexacyanoferrate (II) solutions, in varying concentrations, were used to study the effect of ryegrass roots (Lolium perenne L.) inoculation with Rhizophagus irregularis and a mixture of Rhizophagus irregularis, Funneliformis mosseae, Rhizophagus aggregatus, and Claroideoglomus etunicatum on Fe-CN sorption. Results indicated significantly higher colonization of R. irregularis than for the mixture of AMF species on ryegrass roots. Sorption experiments revealed significantly higher reduction of total CN and
free CN content in the mycorrhizal roots, indicating greater cyanide decrease in the treatment inoculated with R. irregularis. Our study indicates contribution of AM fungi in phytoremediation of Fe-CN contaminated soil.
Arbuscular mycorrhizal fungi (AMF) are integral functioning parts of plant root systems and are widely recognized for enhancing contaminants uptake and metabolism on severely disturbed sites. However, the patterns of their influence on the phytoremediation of iron–cyanide (Fe–CN) complexes are unknown. Fe–CN complexes are of great common interest, as iron is one of the most abundant element in soil and water. Effect of ryegrass (Lolium perenne L.) roots inoculation, using mycorrhizal fungi (Rhizophagus irregularis and a mixture of R. irregularis, Funneliformis mosseae, Rhizophagus aggregatus, and Claroideoglomus etunicatum), on iron–cyanide sorption was studied. Results indicated significantly higher colonization of R. irregularis than the mixture of AMF species on ryegrass roots. Series of batch experiments using potassium hexacyanoferrate (II) solutions, in varying concentrations revealed significantly higher reduction of total CN and free CN content in the mycorrhizal roots, indicating greater cyanide decrease in the treatment inoculated with R. irregularis. Our study is a first indication of the possible positive contribution of AM fungi on the phytoremediation of iron–cyanide complexes.
The soil in the vicinities of former Manufactured Gas Plant (MGP) sites is commonly contaminated with iron-cyanide complexes (ferric ferrocyanide). The phenomenon of cyanide mobility in soil, according to the literature, is mainly governed by the dissolution and precipitation of ferric ferrocyanide, which is only slightly soluble (<1 mg L¡1) under acidic conditions. In this paper, retention properties of the sandy loam soil and the potential vertical movement of the solid iron-cyanide complexes, co-existing with the dissolution, sorption and precipitation reactions were investigated. Preliminary research conducted on a former MGP site implied colloidal transport of ferric ferricyanide from the initial deposition in the wastes layer towards the sandy loam material (secondary accumulation), which possibly retarded the mobility of cyanide (CN). A series of batch and column experiments were applied in order to investigate the retardation of iron-cyanide complexes by the sandy loam soil. Batch experiments revealed that in circumneutral pH conditions sandy loam material decreases the potassium ferro- and ferricyanide concentration. In column experiments a minor reduction in CN concentration was observed prior to addition of iron sulfide (FeS) layer, which induced the formation of the Prussian blue colloids in circumneutral pH conditions. Precipitated solid iron-cyanide complexes were mechanically filtered by the coherent structure of the investigated soil. Additionally, the reduction of the CN concentration of the percolation solutions by the sandy loam soil was presumably induced due to the formation of potassium manganese iron-cyanide (K2Mn[Fe(CN)6]).
Phytoremediation of sites contaminated with iron cyanides can be performed using poplar and willow trees. Poplar and willow trees were grown in potting substrate spiked with ferrocyanide concentrations of up to 2,000 mg kg-1 for 4 and 8 weeks respectively. Soil solution and leaf tissue of different age were sampled for total cyanide analysis every week. Chlorophyll content in the leaves was determined to quantify cyanide toxicity. Results showed that cyanide in the soil solution of spiked soils differed between treatments and on weekly basis and ranged from 0.5 to 1,200 mg l-1. The maximum cyanide content in willow and poplar leaves was 518 mg kg-1 fresh weight (FW) and 148 mg kg-1 FW respectively. Cyanide accumulated in the leaves increased linearly with increasing cyanide concentration in the soil solution. On the long term, significantly more cyanide was accumulated in old leaf tissue than in young tissue. Chlorophyll content in poplar decreased linearly with increasing cyanide in the soil solution and in leaf tissue, and over time. The inhibitory concentration (IC50) value for poplars after 4 weeks of exposure was 173 mg l-1 and for willow after 8 weeks of exposure—768 mg l-1. Results show that willows tolerate much more cyanide and over a longer period than poplars, making them very appropriate for remediating sites highly contaminated with iron cyanides.
Iron-cyanide (Fe-CN) complexes have been detected at Manufactured Gas Plant sites (MGP) worldwide. The risk of groundwater contamination depends mainly on the dissolution of ferric ferrocyanide. In order to design effective reme- diation strategies, it is relevant to understand the contaminant’s fate and transport in soil, and to quantify and mathe- matically model a release rate. The release of iron-cyanide complexes from four contaminated soils, originating from the former MGP in Cottbus, has been studied by using a column experiment. Results indicated that long-term cyanide (CN) release is governed by two phases: one readily dissolved and one strongly fixed. Different isotherm and kinetic equations were used to investigate the driving mechanisms for the ferric ferrocyanide release. Applying the isotherm equations assumed an approach by which two phases were separate in time, whereas the multiple first order equation considered simultaneous occurrence of both cyanide pools. Results indicated varying CN release rates according to the phase and soil. According to isotherm and kinetic models, the long-term iron cyanide release from the MGP soils is a complex phenomenon driven by various mechanisms parallely involving desorption, diffusion and transport processes. Phase I (rapid release) is presumably mainly constrained by the transport process of readily dissolved iron-cyanide complexes combined with desorption of CN bound to reactive heterogeneous surfaces that are in direct contact with the aqueous phase (outer-sphere complexation). Phase II (limited rate) is presumably driven by the diffusion controlled processes involving dissolution of precipitated ferric ferrocyanide from the mineral or inner-sphere complexation of fer- ricyanides. CN release rates in phase I and II were mainly influenced by the pH, organic matter (OM) and the total CN content. The cyanide release rates increased with increasing pH, decreased with low initial CN concentration and were retarded by the increase in OM content.
Soil contamination with iron-cyanide complexes is a common problem at former manufactured gas plant (MGP) sites. Dissolution of the cyanide, from Prussian Blue (ferric ferrocyanide), creates an environmental hazard, whereas the risk of groundwater contamination depends on the stability of dissolved iron–cyanide complexes. Lack of a standard leaching method to determine the water-soluble (plant-available) cyanide fraction generates potential limitations for implementing remediation strategies like phytoremediation. Applicability of neutral solution extraction to determine the water-soluble cyanide fraction and the stability of Prussian Blue in surface and near-surface soils of an MGP site in Cottbus, undersaturated and unsaturated water conditions, was studied in column leaching and batch extraction experiments. MGP soils used in the long-term tests varied according to the pH (5.0–7.7) and the total cyanide content (40–1718 mg kg−1). Column leaching, after four months of percolation, still yielded effluent concentrations exceeding the German drinking water limit (> 50 μg L−1) and the solubility of Prussian Blue reported in the literature (< 1 mg L−1) from both alkaline and acidic soils. Long-term (1344 h) extraction of MGP soils with distilled water was sufficient to dissolve 97% of the total cyanide from the slightly alkaline soils and up to 78% from the acidic soils. Both experiments revealed that dissolution of ferric ferrocyanide under circum-neutral pH and oxic water conditions is a function of time, where the released amount is dependent on the soil pH and total cyanide content. Unexpectedly high and continuous solubility of Prussian Blue, both in acidic and slightly alkaline MGP soils, implies the need to introduce an additional cyanide fraction (“readily soluble fraction”) to improve and specify cyanide leaching methods. Long-term extraction of cyanide-contaminated soil in neutral solution seems to be a promising approach to evaluate the potential hazard of groundwater pollution at the MGP sites.
Cross-linked polyacrylates in post-mining substrates: persistence and effects on plant growth
(2014)
Application of hydrophilic polymers composed of cross-linked polyacrylate can improve soil water-holding capacity and accelerate the restoration of post-mining substrates. In this work, we studied the persistence of a polyacrylate polymer incorporated into a soil and its impact on plant nutrients at a reclamation site of former lignite mining in Lusatia (Germany). In contrast to autumn application, the incorporation of the polymer enhanced the sequestration of plant-derived carbon in the soil, which was reflected by a significant increase in the concentration of a lignin marker. Attenuated total reflexion–Fourier transform infrared spectra (ATR-FTIR) and total elemental contents in the applied polymer suggested an intensive cation exchange between the polymer framework and the soil-forming substrate. In addition, there was an enrichment of carbonaceous material, which seems to reduce the swelling and thus the water-holding capacity of the cross-linked polyacrylate. Conversely, this process protected the polymer structure from rapid decomposition.
The influence of biological soil crusts in natural ecosystems on structures and processes is well investigated. However, in South-Brandenburg (Germany), it is possible to study the development of biological soil crusts (BSC) during initial ecosystem genesis on two artificial water catchments with well-known ages and under differing starting conditions. The two experimental sites are located in the recultivation area of the lignite open-cast mining district of southern Brandenburg with a distance of approximately 1 km between them. Two different topographies were constructed at the experimental sites: the experimental plot at the catchment Neuer Lugteich was shaped like a dune, whereas the artificial water catchment Hühnerwasser was modelled as an inclined slope. The catchment Neuer Lugteich is four years older than Hühnerwasser. The original substrate at Neuer Lugteich is more sandy and carbonate-free compared to the original substrate dumped at Hühnerwasser. At both sites geomorphological differentiation and crust development were compared and the importance of substrate-dependent water availability and crust type clarified. Once settled, the crusts influenced the water regime of the soils by delaying infiltration through enhanced water repellency, and by limiting water infiltration. Chlorophyll analysis revealed that all crusts were at early stages of development. At Neuer Lugteich, the establishment of the biological soil crusts was closely associated with the vegetation succession, whereas no clear succession of the crusts could be observed at Hühnerwasser. The mosaic-like pattern of the biological soils crusts is associated with the distribution of fine-grained material here.zeige weniger
Analysis of 288 percussion drillings from depths of up to seven meters and a 120 m long excavated section provide new and detailed information on the Late Quaternary to Late Holocene floodplain evolution from the most important Central European iron-mining region of the 15th century. The generalized sequence of the Vils River floodplain is built of five units representing facies of different genesis (rock/saprolite, gravel, sand, loam, peat) that are identified by physical, chemical, and mineralogical parameters (grain size, clast shape, and content, TOC, bulk mineralogy). Along the 87 km length of the valley, different units/facies are found at the Upper Vils River (UVR 1-5) and at the Lower Vils River (LVR 1-4b). In both river sections, fine-grained material (flood loam) forms the major part (up to 4 m) of the alluvial sequence. 29 age determinations (24 14C, 4 IRSL, 1 tree-ring analysis) show increasing accumulation of flood loam in the last millennium. The data correlate with the beginning of mining at the Vils River and hence suggest a causal connection with mining activities in the catchment—both on the slopes and in the floodplain—with intense deposition of flood loams.
Our study deals with agricultural recultivation of open cast brown coal mining areas in Lusatia, Eastern Germany. In this region the largest brown coal (lignite) mining area of Germany is located. Lignite mining activities lead to major disturbances of the landscape. Recultivation efforts attempt to regenerate mining areas for agricultural land use options. The geological “parent” material is of saaleian origin, has a sandy texture and was excavated from several meters depths before mining and is now used for recultivating the excavated area. Consequently, it is free of recent soil organic carbon. The substrate itself is unstructured. The partly wet or dry substrate is subjected to strong mechanical stresses during the excavation, deposition, refilling and levelling processes throughout the year. This practice leads to more or less compacted soils/substrates which may result in small yields of agricultural crops. In this context we investigate the effect of different organic soil additives in combination with different recultivation crop rotations on the development of soil structure for improved agricultural land use. Our experimental site has been heaped up and levelled off in 2006 and 2007. On each of the 24 experimental sub areas undisturbed soil samples have been taken to characterise the substrates according to their mechanical and hydraulic parameters and to determine the scattering of these parameters on a site that is assumed to be recultivated as homogenously as possible. First results of our ongoing experimental study indicate that the soil physical properties such as texture, bulk density, precompression stress, air permeability and saturated hydraulic conductivity are not identical on each of the 24 subplots. The soil physical properties behave differently in relation to each other. E.g. we found a negative correlation between bulk density (∼1.35–∼1.90 g/cm3) and precompression stress (∼30–70 kPa) and no decisive interrelation between bulk density and air permeability or saturated hydraulic conductivity.
In Germany, at more than 1000 sites, soil is polluted with an anthropogenic contaminant in form of iron-cyanide complexes. These contaminations are caused by former Manufactured Gas Plants (MGPs), where electricity for lighting was produced in the process of coal gasification. The production of manufactured gas was restrained in 1950, which caused cessation of MGPs. Our study describes the application of Polychromix Handheld Field Portable Near-Infrared (NIR) Analyzer to predict the cyanide concentrations in soil. In recent times, when the soil remediation is of major importance, there is a need to develop rapid and non-destructive methods for contaminant determination in the field. In situ analysis enables determination of ‘hot spots’, is cheap and time saving in comparison to laboratory methods. This paper presents a novel usage of NIR spectroscopy, where a calibration model was developed, using multivariate calibration algorithms, in order to determine NIR spectral response to the cyanide concentration in soil samples. As a control, the contaminant concentration was determined using conventional Flow Injection Analysis (FIA). The experiments revealed that portable near-infrared spectrometers could be a reliable device for identification of contamination ‘hot spots’, where cyanide concentration are higher than 2400
mg kg-1 in the field and >1750 mg kg-1 after sample preparation in the laboratory, but cannot replace traditional laboratory analyses due to high limits of detection.
Soils of former Manufactured Gas Plants (MGPs) are often contaminated with iron-cyanide (Fe-CN) complexes that originate from gas purification process. Cyanide is a potentially toxic substance and its presence in soil and groundwater may cause risk for human health as well as for the environment. MGPs were commonly built on the city suburban areas, which have spread ever since. Nowadays, these sites are typically located in inner cities, causing environmental thread, due to the leaching of pollutants. More recently, columns and batch experiments have been used to study fate and mobility of contaminants is soil. The release of iron-cyanide complexes under unsaturated flow conditions was evaluated with eight columns of 30 cm length and a diameter of 5,4 cm. Cyanide concentrations in the collected leachates were measured with Flow Injection Analysis (FIA). Additionally pH, electrical conductivity (EC) and various ion concentrations were determined. In order to compare the release of Fe-CN complexes in saturated conditions a batch experiment was conducted, where in defined time intervals, 1 ml of the extract water phase was analyzed for CN concentration. Study revealed an analogous trend of cyanide release in both experiments indicating primarily the release of formerly dissolved phase (hexacyanoferrates) followed by continual dissolution of ferric ferrocyanide. We conclude that batch experiments, conducted prior to column analysis, can serve as preliminary prediction of the water soluble cyanide fraction under unsaturated conditions.
Landwirtschaftliche Versuchsfläche Tagebau Jänschwalde - Versuchsdesign und Flächenherstellung
(2013)
Vicinities of manufactured gas plants were often contaminated with solid iron–cyanide complexes
as a result of the coal gasification process. During the remediation of affected soils, knowledge about contaminant concentrations is crucial, but laboratory methods are often expensive and time consuming. Rapid and non-destructive field methods for contaminant determination permit an analysis of large sample numbers and hence, facilitate identification of ‘hot spots’ of contamination. Diffuse near infrared reflectance spectroscopy has proven to be a reliable analytical tool in soil investigation. In order to determine the feasibility of a Polychromix Handheld Field Portable Near-Infrared Analyzer (FP NIR), various sample preparation methods were examined, including homogenizing, sieving, drying, and grinding. Partial least squares calibration models were developed to determine near infrared (NIR) spectral responses to the cyanide concentration in the soil samples. As a control, the contaminant concentration
was determined using conventional flow injection analysis. The experiments revealed that portable
near-infrared spectrometers could be a reliable device for detecting cyanide concentrations >2,400 mgkg−1 in the field and >1,750 mgkg−1 after sample preparation in the laboratory.We found that portable NIR spectrometry cannot replace traditional laboratory analyses due to high limits of detection, but that it could be used for identification of contamination ‘hot spots’.