LS Bodenschutz und Rekultivierung
Refine
Document Type
Keywords
Institute
- FG Geopedologie und Landschaftsentwicklung (23) (remove)
BTU
Analysis of 288 percussion drillings from depths of up to seven meters and a 120 m long excavated section provide new and detailed information on the Late Quaternary to Late Holocene floodplain evolution from the most important Central European iron-mining region of the 15th century. The generalized sequence of the Vils River floodplain is built of five units representing facies of different genesis (rock/saprolite, gravel, sand, loam, peat) that are identified by physical, chemical, and mineralogical parameters (grain size, clast shape, and content, TOC, bulk mineralogy). Along the 87 km length of the valley, different units/facies are found at the Upper Vils River (UVR 1-5) and at the Lower Vils River (LVR 1-4b). In both river sections, fine-grained material (flood loam) forms the major part (up to 4 m) of the alluvial sequence. 29 age determinations (24 14C, 4 IRSL, 1 tree-ring analysis) show increasing accumulation of flood loam in the last millennium. The data correlate with the beginning of mining at the Vils River and hence suggest a causal connection with mining activities in the catchment—both on the slopes and in the floodplain—with intense deposition of flood loams.
Our study deals with agricultural recultivation of open cast brown coal mining areas in Lusatia, Eastern Germany. In this region the largest brown coal (lignite) mining area of Germany is located. Lignite mining activities lead to major disturbances of the landscape. Recultivation efforts attempt to regenerate mining areas for agricultural land use options. The geological “parent” material is of saaleian origin, has a sandy texture and was excavated from several meters depths before mining and is now used for recultivating the excavated area. Consequently, it is free of recent soil organic carbon. The substrate itself is unstructured. The partly wet or dry substrate is subjected to strong mechanical stresses during the excavation, deposition, refilling and levelling processes throughout the year. This practice leads to more or less compacted soils/substrates which may result in small yields of agricultural crops. In this context we investigate the effect of different organic soil additives in combination with different recultivation crop rotations on the development of soil structure for improved agricultural land use. Our experimental site has been heaped up and levelled off in 2006 and 2007. On each of the 24 experimental sub areas undisturbed soil samples have been taken to characterise the substrates according to their mechanical and hydraulic parameters and to determine the scattering of these parameters on a site that is assumed to be recultivated as homogenously as possible. First results of our ongoing experimental study indicate that the soil physical properties such as texture, bulk density, precompression stress, air permeability and saturated hydraulic conductivity are not identical on each of the 24 subplots. The soil physical properties behave differently in relation to each other. E.g. we found a negative correlation between bulk density (∼1.35–∼1.90 g/cm3) and precompression stress (∼30–70 kPa) and no decisive interrelation between bulk density and air permeability or saturated hydraulic conductivity.
In Germany, at more than 1000 sites, soil is polluted with an anthropogenic contaminant in form of iron-cyanide complexes. These contaminations are caused by former Manufactured Gas Plants (MGPs), where electricity for lighting was produced in the process of coal gasification. The production of manufactured gas was restrained in 1950, which caused cessation of MGPs. Our study describes the application of Polychromix Handheld Field Portable Near-Infrared (NIR) Analyzer to predict the cyanide concentrations in soil. In recent times, when the soil remediation is of major importance, there is a need to develop rapid and non-destructive methods for contaminant determination in the field. In situ analysis enables determination of ‘hot spots’, is cheap and time saving in comparison to laboratory methods. This paper presents a novel usage of NIR spectroscopy, where a calibration model was developed, using multivariate calibration algorithms, in order to determine NIR spectral response to the cyanide concentration in soil samples. As a control, the contaminant concentration was determined using conventional Flow Injection Analysis (FIA). The experiments revealed that portable near-infrared spectrometers could be a reliable device for identification of contamination ‘hot spots’, where cyanide concentration are higher than 2400
mg kg-1 in the field and >1750 mg kg-1 after sample preparation in the laboratory, but cannot replace traditional laboratory analyses due to high limits of detection.
Soils of former Manufactured Gas Plants (MGPs) are often contaminated with iron-cyanide (Fe-CN) complexes that originate from gas purification process. Cyanide is a potentially toxic substance and its presence in soil and groundwater may cause risk for human health as well as for the environment. MGPs were commonly built on the city suburban areas, which have spread ever since. Nowadays, these sites are typically located in inner cities, causing environmental thread, due to the leaching of pollutants. More recently, columns and batch experiments have been used to study fate and mobility of contaminants is soil. The release of iron-cyanide complexes under unsaturated flow conditions was evaluated with eight columns of 30 cm length and a diameter of 5,4 cm. Cyanide concentrations in the collected leachates were measured with Flow Injection Analysis (FIA). Additionally pH, electrical conductivity (EC) and various ion concentrations were determined. In order to compare the release of Fe-CN complexes in saturated conditions a batch experiment was conducted, where in defined time intervals, 1 ml of the extract water phase was analyzed for CN concentration. Study revealed an analogous trend of cyanide release in both experiments indicating primarily the release of formerly dissolved phase (hexacyanoferrates) followed by continual dissolution of ferric ferrocyanide. We conclude that batch experiments, conducted prior to column analysis, can serve as preliminary prediction of the water soluble cyanide fraction under unsaturated conditions.