Forschungszentrum Landschaftsentwicklung und Bergbaulandschaften (FZLB)
Refine
Year of publication
Document Type
Keywords
Institute
BTU
The spatial variability of soil physical properties on the landscape scale is often increased by anthropogenic land occupation, not only by current land use but also through the legacies of past land use systems. The remains of historic charcoal hearts are an example for such a disturbance of the soil landscape by former forestry. Such relict charcoal hearths (RCH) exhibit a clearly altered soil stratigraphy, most prominently characterized by a technogenic substrate layer on the soil surface, and their soil physical properties can considerably differ from those of surrounding forest soils. The aim of our study is to characterize the soil water and temperature regime on RHC in a pre-industrial charcoal production area in Brandenburg, Germany, as compared with the surrounding sandy forest soils. Soil properties were analyzed in profiles on and around hearth sites and are monitored in a sensor transect equipped with soil
moisture sensors and pF-meters. Results of soil sample analyses show differences in density and porosity between the RCH soils and surrounding forest soils, not only in the technogenic layer but also in the buried soil layers on hearth sites. The soil water characteristic curves determined in the laboratory indicate a modified pore size distribution and lower plant available water contents in the RCH soils. Preliminary results of the ongoing soil water monitoring, however, show increased soil wetness in the RCH soils, along with lower soil moisture tensions. Furthermore, the measurements show higher variations of soil temperature in RCH soils. The results affirm that the legacies of historic charcoal production can increase the spatial variability of soil physical properties and therefore also of ecological site conditions in forest areas. The results of soil moisture monitoring suggest that a determination of soil physical parameters in the laboratory is not sufficient to characterize the spatio-temporal variations of the soil water regime.
Historical charcoal production has long been an unconsidered type of forest utilization in lowland areas. The archaeological discovery of a large charcoal burning area in the forefield of the active opencast lignite mine J€anschwalde in SE Brandenburg (North German Lowlands) has highlighted the need for multidisciplinary research in the study of the dimensions of historical charcoal burning. The charcoal produced in our study area, the former royal forest district Tauer, provided energy for the nearby Peitz ironworks during its operation from the mid-16th to the mid-19th century. Here, we aimed to record the amount, size and distribution of relict charcoal hearths (RCHs) to examine their context with respect to the ironworks and to better understand the potential impacts on late Quaternary landscape change. The applied methods combined archaeological research with shaded-relief mapping of RCHs. To evaluate the detection success of RCHs in the shaded-relief maps (SRMs), we compared the results with the results from specific archaeological surveys and conventional forest site mapping. Furthermore, we analyzed our dataset with descriptive, comparable and spatial statistics. Additionally, dendrochronological dating of charcoal fragments from selected RCHs was used to investigate the temporal relationships among the RCHs. Approximately 6000 circular RCHs were manually digitally identified in the SRMs of the 109-km2 evaluable area. However, ground truthing showed that the shaded-relief maps could not completely capture all RCHs in our study area due to local conditions. At the regional scale, two focus areas with high RCH site densities were found. Statistical analysis revealed that the diameters of the RCHs range widely from 4 to 30.5 m. Spatial statistics were applied to the RCH diameters to aggregate areas with larger or smaller RCHs. At the small scale, no systematic arrangement of RCHs was obvious in the SRMs. Dendrochronological dating of selected RCHs lying close together could not detect significant spatiotemporal relationships or patterns. The dating results also showed that some areas have been preferentially used for charcoal production for over 300 years. Due to the homogeneity of the physiogeographical location factors, we assume that these factors are not superficially responsible for site selection. Instead, economic location factors and contemporary regulations are more likely responsible for the distribution of RCHs.
Relict charcoal hearths are round or elliptical earthen platforms up to 11 m in diameter and a widespread feature of historical industry that supplied charcoal used in the production of iron in furnaces or smelters. The iron industry dominated Litchfield County, Connecticut, and surrounding areas in the northeastUnited States throughout the 19th century, peaking in ∼1850. The large number of charcoal hearths in this region is a relic of >150 years of widespread iron production. In this study, we describe the architecture and soil stratigraphy of 26 charcoal hearths in Litchfield County. This contribution aims to (1) compare soils that comprise the charcoal hearths with “natural” adjacent soils, (2) measure the thickness of topsoil developed upon the hearths, and (3) characterize the stratigraphy associated with these features. Results indicate that the black topsoils overlying the charcoal hearths contain residual charcoal and are on average 2.6 times thicker than adjacentCambisols. Charcoal hearths display two ormore black, charcoal-rich strata separated by layers of reddish-brown soil low in charcoal content indicating multiple episodes of use.We also find that many charcoal hearths have been stabilized with boulders on the downslope side during construction and repeated use.Overall, the results presented here provide significant information regarding the construction, use, and associated impacts of earthen platforms for charcoal production in the northeastUnited States, with further relevance to other areas where historical charcoal production occurred.
Knowledge of the position of archaeological remains in the surface relief provides important basic information for archaeological survey design and interpretation. Geomorphological processes in (pre)history may have resulted in a modification of the local relief around archaeological sites, especially in areas that are prone to sediment erosion and relocation, such as sheet sand and dune landscapes. In this study, we reconstructed and analysed the palaeorelief of an archaeological excavation site in an inland dune area in southern Brandenburg, Germany. The remains of two Mesolithic sites were documented in the archaeological excavations and found to be associated with a buried soil horizon. To gather information on the relief of the buried soil surface, we used a combination of sedimentological and pedological profile descriptions along archaeological survey trenches and geophysical prospection with ground penetrating radar supplemented with microdrone photography and photogrammetry, global positioning system (GPS) surveys, and analysis of LiDAR-based elevation models. A digital elevation model of the buried surface was generated and analysed using a geographical information system (GIS). A comparison of the palaeosurface model with the recent surface elevation model shows that sand remobilization resulted in a considerable reshaping of the relief. Further, an analysis of the buried surface model shows that the relief position of the two archaeological sites in the study area was considerably more prominent in relation to the corresponding buried soil surface than in relation to the recent surface morphology. The results affirm the significance of Holocene sediment relocation for the local surface morphology and the importance of considering such relief modifications in archaeological surveys.
Various sources provide information about land use history and landscape transformation. For a variety of reasons, the quality of information differs and is often discontinuous or incomplete. In this interdisciplinary study we take advantage of comprehensive archaeological data gathered by large-scale excavations that were necessary because of opencast lignite mining in Lusatia, Brandenburg, Germany. By using a GIS we integrate these archaeological findings with results from archival and literature studies, from historical maps, from landforms and soils as well as from analyses of shaded-relief maps derived from up-to-date LiDAR data. The long-term aim is to develop a palaeoenvironmental model and thus to reconstruct landscape changes caused by human activities. The focus of the study is the Peitz ironwork in SE Brandenburg, which was a large consumer of commodities for about 300 years. During the time it operated, extensive transformations are supposed to have affected the landscape in the vicinity because of wood consumption and especially charcoal production. Digital datasets about forested areas for different timespans reconstructed from historical maps were made available. In combination with dendrochronological dating of charred trees, the spatiotemporal dimension of charcoal kilns was determined. Also, sites of former bog iron ore mining could be identified. Moreover, the different sources contain further information about other forms of land uses such as agriculture, pastoralism and even viticulture. In conclusion we can highlight that the mosaic of past land use systems is different from the modern structure but that major changes in the forests have been retained.
Archaeological excavations have revealed more than thousand charcoal kiln remains (CKRs) in the prefield of
the active opencast lignite mine Jänschwalde, situated about 150 km SE of Berlin (SE Brandenburg, Germany).
The charcoal was mainly produced for the ironwork Peitz nearby, which operated from the 16th to the mid-19th
centuries. In a first approach, to estimate the dimension of the charcoal production, CKRs were mapped on
shaded-relief maps (SRMs) derived from high-resolution LiDAR data (Raab et al. 2015). Subsequently, for a selected test area, identified CKRs on the SRMs were compared with archaeologically excavated CKRs in the
field. This survey showed a considerably number of falsely detected sites. Therefore, the data was critically
re-evaluated using additional relief visualisations. Further, we extended the CKR mapping to areas which are not
archaeologically investigated. The study area, the former royal forest district Tauer, consists of two separate areas: the Tauersche Heide (c. 96 km2 area) N of Peitz and the area Jänschwalde (c. 32 km2 area) NE of Peitz. The study area is characterized by a flat topography. Different former and current anthropogenic uses (e.g., military training, solar power plant, forestry measures) have affected the study area, resulting in extensive disturbances of the terrain surface. The revised CKR abundance in the study area Jänschwalde was considerably smaller than the numbers produced by our first approach. Further, the CKR mapping revealed, that a total record of the CKRs is not possible for various reasons. Despite these limitations, a solid database can be provided for a much larger area than before. Basic statistic parameters of the CKR diameters and all comparative statistical tests were calculated using SPSS. To detect underlying spatial relationships in the CKR site distribution, we applied the Getis-Ord Gi* statistic, a method to test for local spatial autocorrelation between neighbouring sites. The test is available as part of the ArcGis 10.1 spatial statistics toolbox. The outcomes are discussed in consideration of our archaeological, archival and dendrochronological research results.
At the former Diplomat Mine near Forestburg, Alberta, Canada we find a diverse soil landscape which can help to conceptualize factors and processes controlling initial pedogenesis and soil distribution on very young landforms in prairie environments. Due to differing reclamation practices in the 1950s and landslides occurring after spoil dumping, four areas can be distinguished by GoogleMaps/LiDAR evaluation and onsite field survey: (i) not-mined, (ii) stock piled and unreclaimed, (iii) stock piled and reclaimed and (iv) affected by post-mining geomorphodynamics and quasi-natural redeposition. The parent material for areas (ii) to (iv) was initially dumped by spreaders but only (ii) didn’t undergo further change. Landscape (iii) has seen levelling of the piles by heavy machinery. Features of landscape (iv) are formed by reshaping the originally dumped and levelled structures. This last landscape unit marks the rim of
the former mine adjacent to the river valley. In practice, mining activities formed new valley slopes. In contrast
to the naturally developed slopes the mine slopes were less stable. Vegetation, which could have hindered slope
wash erosion, was missing after dumping the spoil slopes. Slopes were very steep (or practically undercut) and
therefore, substrates were naturally re-located by mass movements such as sliding and slumping. Characteristic
sliding and slumping structures can be identified in the close-ups of the LiDAR images. Both processes, mass movement and slope wash erosion, may have overlapped. Landscape (ii) is the most contrasting one. Dumped stock piles formed elongated, curved and steep ridges. These landforms do not have a natural analogue but clearly show their technological origin. Most interesting are differences in vegetation. South and southwest facing slopes are covered with grassland whereas north and northeast facing slopes are covered with aspen trees. Some of the ditches are filled with water and form small elongated ponds. The characteristic geomorphology of the prairie can be found in landscape (i). Distinct differences are found in properties and types of soils in these four landscapes. Natural soils and pile soils characteristically differ in parent material and soil horizons. No information is gathered yet for the reclaimed soils and the landslides soils due to prohibited access. However, based on what we find at the former Diplomat Mine we can conclude that distribution, development and properties of unreclaimed soils in historical open cast mines in Alberta are primarily controlled by parent material and topography. The geomorphological set-up is dominating the trajectory of vegetation development and post-mining geomorphodynamics. Contrasting slope aspects determine micro climatic conditions and lead to different vegetation types. This has likely had an effect on soil development and soil properties (especially carbon stocks). Further studies will be conducted to quantify these differing soil properties to refine this conceptual model of initial pedogenesis and soil distribution on very young landforms in the prairie landscapes.
This study outlines the opportunities for geoarchaeological research in active opencast lignite mines in southern Brandenburg (Germany). Studies on extensive outcrops that address both archaeology and soil geomorphology, combined with a geographical information system (GIS) approach, provide unique insights into human-induced environmental changes in Lower Lusatia and generally improve our understanding of landscape dynamics. We present the
most recent results from three case studies and review important findings from the last several years. Studies conducted in opencast mines of Cottbus-Nord and Jänschwalde focus on (i) Late Quaternary geomorphodynamics and soil development and (ii) past land use and the legacy of agriculture and woodland use. Our results are similar to those in other regions in Central Europe, but we also observe regional differences caused by the local setting, e.g. intensification of soil erosion coinciding with the expansion of farming of cultivated lands in the Slavic Middle Ages. Our research reveals the largest archaeologically investigated area of historical charcoal production in the Northern European Lowland (NEL). We are clearly only beginning to understand the massive dimensions of charcoal production in the region.
Automated detection of small-scale anthropogenic relief features from high-resolution ALS-data
(2014)
Analysing the spatial distribution of anthropogenic relief structures can contribute to the understanding of past landuse systems. With automated mapping routines, small relief forms can be detected efficiently from high-resolution digital terrain models (DTMs). In this study, we describe an approach for the automated mapping of charcoal kiln sites from an airborne laser-scanning DTM. The study site is located north of Cottbus, Germany, where an exceptionally large historic charcoal production field has been documented in previous archaeological surveys. The goal of this study was to implement, evaluate and improve an automated GIS-based routine for mapping these features based on the template-matching principle. In addition to the DTM, different morphometric variables were evaluated for their suitability to detect kiln sites. The mapping results were validated against a comprehensive database of kiln sites recorded from archaeological excavations and via manual digitization. The effects of irregular kiln-site geometry and DTM noise were evaluated using synthetic DTMs. The results of the synthetic DTM mapping show that the template-matching results differed depending on the morphometric variable used for the mapping process. In accordance with this observation, a validation of the mapping procedure for the field site suggests that feature mapping can be improved. In particular, the number of false detections can be reduced using a combination of morphometric variables. For the validation area, the kiln sites with diameters of at least 10m were mapped using the automated routine, with detection rates that were close to those of manual digitization. Therefore, the described method can considerably facilitate the mapping and distribution analysis of kiln sites or similar small relief forms that are prominent in a specific landscape.
In pre-industrial times, charcoal burning was a common source of energy across Europe. Charcoal production and its related consequences for the upland environment are well known due to historical and palaeoenvironmental research. In recent years, awareness has grown regarding the use of woods in the lowlands for charcoal production. In the last 20 years, a large charcoal-burning field in Lower Lusatia (Brandenburg, North German Lowlands) was discovered by systematic archaeological excavations of the opencast mine of Jänschwalde. However, the excavations are limited to the mine, which only covers a portion of the Jänschwalder Heide and the surrounding forests.
In this paper, we present the results of our study regarding the spatial extension and timing of charcoal production in the Jänschwalder Heide and its surrounding areas. We applied a combined approach using archaeological research results, GIS-analyses of shaded-relief maps (SRMs) and tree-ring dating of selected charcoal kiln remains. Approximately 900 excavated charcoal kiln ground plans were analysed, which provided a solid data basis for our GIS analyses. For an extensive evaluation, we enlarged our study area beyond the limits of the lignite mine. We identified and digitised the remains of the charcoal kilns by creating SRMs from digital elevation models (DEMs) that were based on high-resolution airborne laser scanning data (ALS). The data from the excavated and digitised charcoal kiln remains were analysed in terms of their sizes and spatial distributions. In addition, the dendrochronological ages of 16 selected charcoal kiln remains were determined.
This study shows that charcoal production was more extensive than initially proven by archaeological excavations. The remains of more than 5000 charcoal kilns were detected on the SRMs across an area that was twice as large as the excavated charcoal-burning field. In the Jänschwalder Heide, considerably more charcoal kiln relicts exist compared with the surrounding communal areas. Furthermore, the charcoal kiln remains in the Jänschwalder Heide have larger diameters, suggesting large-scale charcoal production for supplying energy to the nearby ironworks at Peitz. However, the charcoal production on the communal land was most likely for local crafts. The ages of the charcoal kiln remains indicated that charcoal production occurred between the 17th and 19th centuries, corresponding with the main period of charcoal burning. Overall, our study suggested that charcoal production sites are underestimated in the modern landscapes of the North German Lowlands.
The former royal forest districts around Peitz (South Brandenburg, Germany) were used to produce charcoal for
the ironwork Peitz (1554 to 1856). More than 800 archaeologically excavated ground plans of charcoal kilns give evidence of the burning activity in the study area “Jänschwalde Heide” which is only a small part of the whole forest district. The study area in the apron of the active lignite mine Jänschwalde comprises the royal forest “Jänschwalder Heide” and the surrounding community forests. Our study approach combines archaeological research, a GIS-based approach (historical maps, airborne laser scanning (ALS) data, etc.) and archival studies.
High-resolution digital elevation data from airborne laser scanning (ALS) allow for identification and mapping of so far unknown small-scale relief features that are hidden by forest cover. Especially as a result of historic land use, small anthropogenic landforms can occur, e.g., remains of charcoal kilns on sites that were used for charcoal
production or ridge and furrow systems in former farmland areas. Mapping such relief features and analyzing their spatial distribution patterns can help to understand past land-use systems and their effects on landscapes. To efficiently detect and quantify small-scale relief features from high-resolution DEMs for larger areas, (semi-)
automated mapping routines are required.
During the last decades, archaeological research has revealed that large-scale charcoal burning was carried out
in Lower Lusatia (South Brandenburg) situated within the North Germany Lowland. From the 17th to the 19th century, charcoal was mainly produced for the ironwork in Peitz. Within the framework of the ICLEA project lake
sediments from two lakes, Byhleguhrer See and Großsee, are investigated to study the impact of pre-industrial charcoal production on the environment.
In the apron of three active lignite opencast pits in Lower Lusatia (Brandenburg, Germany), archaeological survey
trenches were investigated in areas where Quaternary aeolian sand deposits are widespread. The investigated
palaeoenvironmental archives in Jänschwalde, Cottbus-Nord and Welzow contain evidence of fluvial and aeolian
morphodynamics, soil formation and agricultural land use from (pre-)historic to modern times. To study the age
and the causes of sand drifting and landform stabilization, standard soil physical and chemical laboratory analyses as well as optically stimulated luminescence (OSL) and radiocarbon dating (14C) were carried out. Two main sedimentological units were identified: Unit 1 consists of glacio-fluvial and Late Weichselian aeolian sands representing the parent material for the native Podsol-Braunerde and Podsol development, while Unit 2 represents the Late Holocene aeolian deposits. Four periods of Late glacial and Holocene aeolian activity and three phases of geomorphological stability have been identified: (i) Aeolian sedimentation during the Late glacial, (ii) Mesolithic reactivation of aeolian processes, (iii) soil formation until Late Roman Iron Age settlers intensified the agricultural land use, (iv) intensive drift sand formation during the High Middle Ages due to agricultural expansion, (v) stabilization
of the drift sands and weak soil formation, (vi) reactivation of aeolian processes due to the increasing wood consumption and charcoal production from the early 16th until the mid-19th century, (vii) surface stabilization and formation of Regosols since the mid-19th century due to afforestation.
Within the apron of the opencast mine Jänschwalde (SE Brandenburg, Germany) archaeological excavations on a
multiple populated small dune were complemented with soil-geomorphological investigations in the vicinity. Archaeological findings in the dune stratigraphy (especially cremation graves) are intercalated within aeolian sediments and/or buried soils and thus give a record of the Late Quaternary geomorphodynamic and soil development.
In Lusatia, Northeastern Germany, the production of ironware between the 16th and 19th century left behind a
remarkable amount of charcoal kilns in the forests north of Cottbus. Remote sensing surveys, underpinned by
archaeological studies, show that charcoal was gained around Cottbus from several thousand charcoal kilns which
had internal diameters up to 20 m. For the study site with 35 km2 area, the until now prospected total ground area
below the charcoal kilns which was potentially affected by the pyrolysis is about 0,5 km2. Historic data indicates that the pyrolysis in the charcoal kiln took up to several weeks, for the kilns with a diameter of 20 m about 20 days. To characterize the depth of thermal alteration of soils below the kiln our current focus is on the differentiation of the iron hydroxides by small-scale vertical analysis of soil profiles.
South Brandenburg is the central part of the North European Lowland (NEL) extending as a plain landscape from
the North and Baltic Sea to the foothills of the Central European Highlands and reaching from the Netherlands to Poland. Since many decades lignite opencast mines have been operating in this region which is known as the Lusatian mining district. The total land demand in Lusatia is about 852 square kilometres and mining will continue
for many more years or even decades. Large-scale outcrops resulting from these mining activities are excellent archives to study the younger Earth’s history. The scope of our research in open cast mines is to reconstruct the
Late Quaternary landscape development and to distinguishing natural from anthropogenic forcing and processes. In more detail, the aims are to identify and to quantify the impact of past land uses, i.e. changes of vegetation, landforms and soils induced by agriculture and/or forestry. Here, we are presenting latest results from our research and review important findings giving novel insights into man-induced environmental changes in Lusatia within the past thousands years and thus improving the general understanding of Late Quaternary landscape dynamics.
Die hier vorgestellte Forschungsarbeit beschäftigt sich mit der Rekonstruktion der Landschafts- und Umweltgeschichte mithilfe Geographischer Informationssysteme (GIS) und historischer Karten. In einem Modell sollen die räumliche Dimension der Köhlerei, der damit verbundene Holzverbrauch, der Zustand der Wälder, die vorhandene Infrastruktur etc. errechnet und dargestellt werden. Zeitlicher Schwerpunkt ist die zweite Hälfte des 18. Jahrhunderts und die Mitte des 19. Jahrhunderts.